Amphenol Sine connectors
Product Summary
LJR Electronics can offer a range of high performance connectors for harsh environments such as Aerospace and Induistrial applications. Our experience in supplying the aerospace and defense markets enables us to offer a number of high performance connector styles in both standard and customised designs
Materials and Platings
| Shell Materials | Aluminium | Stainless Steel | Composite / Thermoplastic |
|---|---|---|---|
| Typical Salt Spray Performance* | Up to > 1000 hours (finish dependent) |
Up to > 1000 hours (finish dependent) |
Corrosion-proof housing (no metal shell) |
*Performance is typical and depends on connector series, plating finish and specific part number. Always refer to the manufacturer’s datasheet for exact test results.
| Plating Finish | Electroless Nickel | Nickel | Black Zinc-Nickel | Zinc-Cobalt |
|---|---|---|---|---|
| Colour | Shiny Silver | Silver | Matte Black | Dark Green / Black |
| Corrosion Resistance | High | High | Very High | Moderate–High |
| EMI Suitability | Excellent | Good | Excellent | Fair |
| Typical Applications | Harsh env., EMI-sensitive equipment | General industrial and transportation | Off-highway, military, heavy-duty | Cost-sensitive corrosion protection |
| RoHS Compliance | Yes | Yes | <Yes (cadmium-free) | Series dependent |
Information above is a general overview for Amphenol-type industrial connectors. Exact performance, available materials and finishes vary by connector series.
Product Types
ADP-20 Series Connectors
ADP-20 connectors are a versatile connector solution for harsh environment applications in the construction, mining, marine, and agricultural industries. These heavy-duty thermoplastic, circular shaped connectors feature quick connect & disconnect bayonet couplings, silicone seals, and a rear insertion/rear removal contact system. Offered in two shell sizes and in 19 different configurations, ranging from 2 to 47 cavities and can accommodate multiple size contacts & wire sizes.
AD-30 Series Connectors
AD-30 connectors are constructed with a rugged aluminum shell developed to meet the needs of the heavy-duty truck, bus and off-highway industries. These connectors offer multiple pin configurations that accept contact sizes 4 to 20. HD30 connectors are circular shaped and feature quick connect & disconnect bayonet couplings, silicone seals and a rear insertion/rear removal contact system. Also offers adaptor and cable clamp modifications that support the wires while reducing strain on the connectors.
ARC Series Connectors
ARC connectors are designed for off-road, heavy-duty industrial, recreational, and agricultural applications. The environmentally sealed, rectangular shaped ARC connectors are offered with insert arrangements of 24, 40, 50, 60, 64, 70, and 76 cavities that accept size 16 and 20 contacts. Several mounting options are available including in-line, flange mount, and PCB mount.
AT Series Connectors
Range of environmentally sealed connectors designed for cable to cable applications. Thermoplastic housings offer a wide operating temperature range plus silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture. Contact insertion and removal does not require any special tools, with contacts retained in a locked position by integral dielectric fingers. Secondary wedge-locks are assembled at the mating interfaces to provide proper contact positioning.
AT Series
Environmentally sealed connector AT Series designed for cable to cable applications on the engine or transmission, under the bonnet and on the chassis or in the cab. On signal level circuits in harsh environment conditions – Size 16 contacts
ATM Series
Feature miniature contacts with ATM Series enhanced design based on the AT Series. ATM is the connector to be used in harsh environmental applications such as around the engine, transmission and under the bonnet – Size 20 contacts
ATHD Series
Offers an environmentally sealed, single power circuit termination with a current rating from 25 to 100 Amps. The plug features an integral coupling latch that provides tactile and audible feedback during coupling – Size 4, 8 or 12 contact.
ATP Series
Designed for power applications, DTP Series fills the need for higher amperage, multipin connectors. Offers ability to use multiple 12 gauge contacts, each with a 25 amp continuous capacity, within a single shell – Size 12 contacts